Gjøco Herregård Door and Window, FINISHED WHITE

Product Description

INSTRUCTIONS FOR USE

Pre-treatment The surface must be clean and dry.

Previously treated surfaces should be cleaned with Gjøco Krafttvätt. New and bare wood surfaces that have been untreated for more than 4 weeks should be wire-brushed and washed with Gjøco Hustvätt before priming. On planed wood and other glossy and hard surfaces, wire-brushing/sanding may be necessary to ensure adhesion. Sharp edges should be rounded to ensure the best possible edge coverage. Loose paint/glaze flakes and loose wood fibers are removed by wire-brushing/scraping.

Pressure-treated wood that may be wax or silicone treated must be degreased with, for example, denatured alcohol.

Priming: On new, untreated, bare or treated wood and putty joints, apply one coat of Gjøco

Oil Primer. End grain and cut surfaces should be well saturated with Gjøco Oil Primer, preferably 3-4 coats wet-on-wet.

Application

On new untreated wood, apply 2 coats, and on new planed wood, apply 3 coats. On previously treated wood, apply 1-2 coats as needed, or up to 3 coats on planed wood.

Storage

The product must be transported and stored in a dry, frost-free place. The product must be transported and stored upright.

Waste Management

Liquid paint should not be poured into drains or the environment but delivered to an approved hazardous waste collection point.

OTHER INFORMATION

• Different production numbers should be mixed before use to avoid gloss and color differences.

• The substrate must be firm, clean, and dry before the paint is applied.

• Substrates previously treated with linseed oil paint/stain can cause blistering.

• Previous treatment with tar can lead to discoloration, which is particularly visible in light colors.

• Dew on semi-dry surfaces can cause matte spots.

• Direct sunlight on a wet or semi-dry surface can cause skinning and blistering.

• Do not use on frozen surfaces.

• Painting on fire-retardant surfaces can lead to salt efflorescence and peeling.

• The product should not be diluted or mixed with other oils/paint products.

• Bases are tintable with GjøcoMix.

• Application temperature in the air and on the substrate must be at least +5°C.

For more detailed information, see the safety and product data sheets.

Specifications

Data Sheets

Technical Data Sheet

Safety Data Sheet

connections ,gjoco-oljegrunning-exterior-vit-penetrerande-grund-for-trafasad,gjoco-proff-aquagrunn-hvit-grundning-for-trafasad,gjoco-hustvatt,joco-krafttvatt-underhallstvatt-som-haller-ditt-hus-fint-lange-kopia,anza-tvattborste-valvd-280mm,anza-skrapa-hammarhuvud,anza-tvahandskrapa-ergo,anza-platinum-precision,anza-platinum-snedstalld-lackpensel-med-ask,anza-super-effective-snedstalld-lackpensel-ergo,anza-platinum-rundpensel,scotch®-maskeringstejp-ute-inne-washipapper,