Gjøco Herregård Door and Window, OPTIONAL COLOR

Product description

INSTRUCTIONS FOR USE

Pre-treatment: The surface must be clean and dry.

Previously treated surfaces should be cleaned with Gjøco Power Wash. New and bare wood surfaces that have been untreated for more than 4 weeks should be wire-brushed and washed with Gjøco House Wash before priming. On planed wood and other glossy and hard surfaces, wire-brushing/sanding may be necessary to ensure adhesion. Sharp edges should be rounded to ensure the best possible edge coverage. Loose paint/stain flakes and loose wood fibers are removed by wire-brushing/scraping.

Pressure-treated wood that may be wax or silicone treated must be degreased with, for example, methylated spirits.

Priming: On new, untreated, bare, or treated wood and putty joints, apply one coat of Gjøco

Oil Primer. End grain and cut surfaces should be well saturated with Gjøco Oil Primer, preferably 3-4 coats wet-on-wet.

Application

On new untreated wood, apply 2 coats, and on new planed wood, apply 3 coats. On previously treated wood, apply 1-2 coats as needed, or up to 3 coats on planed wood.

Storage

The product must be transported and stored dry and frost-free. The product must be transported and stored upright.

Waste disposal

Liquid paint should not be poured into drains or the environment, but must be delivered to an approved hazardous waste collection point.

OTHER INFORMATION

• Different production numbers should be mixed before use to avoid gloss and color differences.

• The substrate must be firm, clean, and dry before the paint is applied.

• Substrates previously treated with linseed oil paint/stain can cause blistering.

• Previous treatment with tar can lead to discoloration, which is particularly visible in light colors.

• Dew on semi-dry surfaces can cause dull spots.

• Direct sunlight on a wet or semi-dry surface can cause surface drying and blistering.

• Do not use on a frozen substrate.

• Painting on fire-retardant surfaces can cause salt efflorescence and peeling.

• The product must not be diluted or mixed with other oils/paint products.

• Bases can be tinted with GjøcoMix.

• Application temperature in the air and on the substrate must be at least +5°C.

For more detailed information, see safety and product data sheets.

Specifications

Data Sheets

Technical Data Sheet

Safety Data Sheet

connections ,gjoco-oljegrunning-exterior-vit-penetrerande-grund-for-trafasad,gjoco-proff-aquagrunn-hvit-grundning-for-trafasad,gjoco-hustvatt,joco-krafttvatt-underhallstvatt-som-haller-ditt-hus-fint-lange-kopia,anza-tvattborste-valvd-280mm,anza-skrapa-hammarhuvud,anza-tvahandskrapa-ergo,anza-platinum-precision,anza-platinum-snedstalld-lackpensel-med-ask,anza-super-effective-snedstalld-lackpensel-ergo,anza-platinum-rundpensel,scotch®-maskeringstejp-ute-inne-washipapper,