Meguiar’s Ultimate Ceramic Coating – Patented technology cures the product into a solid barrier similar to professional ceramic paint coatings!
- Incredibly water-repellent with exceptional durability
- Increases gloss and smoothness – while masking minor defects
- Primarily developed for exterior paint but also works well on plastic trim, decals, PPF, and wheels.
Product description
For best results, we recommend that the paint finish is in the best possible condition before use.
Perform a three-step polishing process (clay, compound, and polish) before application to ensure the best adhesion and finish.
DIRECTIONS:
SHAKE WELL. Wash and dry the vehicle thoroughly before application. Apply in the shade, on cool surfaces. If the surface is warm during application, you will experience an uneven result. We recommend using high-quality microfiber such as Meguiar’s® Supreme Shine™ & Even Coat Microfiber Applicator Pads.
- Spray the product onto a microfiber applicator. We recommend doing one panel at a time.
- Spread the product with the applicator using light to moderate pressure over the panel in a cross-hatch motion. This step is what activates the curing process.
- Wait approximately 15 seconds and then wipe off the product with a clean microfiber towel once you have spread it over the surface.
- Continue this process over the entire vehicle.
- Wash all microfiber towels & applicators immediately after finishing the treatment.
You can use this product on other exterior surfaces such as plastic trim, decals, paint protection film (PPF), and wheels. Follow the same procedure for these other exterior surfaces. Durability will vary depending on the initial condition of the surface.
MAINTENANCE:
Washing the vehicle frequently ensures maximum durability for as long as possible. Wash the vehicle with pH-balanced car shampoos, such as Meguiar’s® Ultimate Wash & Wax or Meguiar’s® Hybrid Ceramic Wash & Wax.
To keep the Ultimate Ceramic Coating finish for as long as possible, use only premium maintenance products such as Meguiar’s® Ultimate Quik Detailer™ or Meguiar’s® Hybrid Ceramic Detailer, as often as desired.
WARNING: After the paint has been treated with Ultimate Ceramic Coating, do not use clay, polish, compound, liquid- or paste waxes on your vehicle, as these will remove or reduce the effect of the coating.
INSTRUCTIONS FOR USE:
Spray, spread & wipe off. Do not overdose – one bottle is enough for four medium-sized vehicles! Not recommended for matte or satin paints as it will provide unwanted gloss.
Data Sheet
Meguiar's Ultimate Ceramic Coating G2401
UFI: XKE0-P6VW-P30N-8HSJ
Warning
Causes skin irritation. Causes serious eye irritation.
If medical advice is needed, have product container or label at hand. Keep out of reach of children. Wash hands thoroughly after handling. Wear protective gloves and eye protection.
IF IN EYES:
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Contains 1,2-BENZISOTHIAZOL-3(2H)-ONE. May produce an allergic reaction.
(Quantity; weight or volume)
Meguiar's (Kemhuset AB)
Mjödvägen 2b
746 50 Bålsta
Tel: +46 8 21 05 80
support@meguiars.se
SDS_ID: 66423
Size and volume
Keep in mind that you must size your product labeling according to the table below.
Package capacity Label dimensions (in millimeters) Pictogram dimensions (in millimeters)
≤ 3 liters If possible at least 52 x 74 At least 10 x 10, If possible at least 16 x 16
> 3 liters but ≤ 50 liters At least 74 x 105 At least 23 x 23
> 50 liters but ≤ 500 liters At least 105 x 148 At least 32 x 32
> 500 liters At least 148 x 210 At least 46 x 46
The pictogram must cover at least one-fifteenth of the area of the label dedicated to the mandatory labeling information.
Do not forget to replace the text in parentheses (Quantity; weight or volume) in the template with the product quantity if the product is intended to be sold to the general public!
Placement
Hazard pictograms, signal words, hazard statements, and precautionary statements must be placed next to each other on the label.
Hazard statements should be grouped together, while the order can be chosen freely. Precautionary statements should be grouped together, while the order can be chosen freely.
Language
In cases where more than one language is used, hazard and precautionary statements in the same language must be grouped together.
Responsibility
The information in this document includes only what must be included in the product labeling based on the safety data sheet and is intended to be processed before being printed on a label. Please note that the product may be subject to additional mandatory labeling requirements depending on the use of the product. Be sure to check the content and information provided in this product labeling template.
Additional information
If the product is an aerosol, the inverted epsilon symbol must be indicated on the label together with the net weight/volume of the contents and the nominal total capacity of the container. The latter must be indicated within a box.
Please note that some hazard classifications entail requirements for child-resistant fastenings and/or tactile warning markings. The classification for your product can be found in Section 2.1 of the product's safety data sheet.
Packaging, regardless of capacity, containing substances or mixtures provided to the general public and classified for any of the following must be provided with a tactile warning label:
- Acute toxicity in category 1-4: H300, H310, H330, H301, H311, H331, H302, H312, H332
- Skin corrosion: H314
- Aspiration hazard (some exceptions for aerosols with flammable contents): H304
- Respiratory sensitization: H334
- Mutagenicity, carcinogenicity, or reproductive toxicity, category 2: H341, H351, H361f, H361d, H361fd
- Specific target organ toxicity category 1 or 2, single exposure: H370, H371
- Specific target organ toxicity category 1 or 2, repeated exposure: H372, H373
- Flammable gases, liquids, and solids, category 1 and 2: H220, H230, H231, H232, H221, H224, H225, H228
Packaging, regardless of capacity, containing substances or mixtures provided to the general public and classified for the following must be provided with child-resistant fastenings:
- Acute toxicity in category 1-3: H300, H310, H330, H301, H311, H331
- Skin corrosion: H314
- Aspiration hazard (except for aerosols and containers with a sealed spray device): H304
- Specific target organ toxicity category 1, single exposure: H370
- Specific target organ toxicity category 1, repeated exposure: H372
- The product contains ≥ 3% methanol (cas-no 67-56-1) or ≥ 1% dichloromethane (cas-no 75-09-2).
UFI
If a UFI code has been generated for the product, this must be placed on the label together with the supplementary hazard information. Powered by TCPDF (www.tcpdf.org)
SDS_ID: 66423
connectionsconnections ,meguiars-ultimate-wash-wax,
