INSTRUCTIONS FOR USE
Pre-treatment
The surface must be clean and dry. Previously painted surfaces should be washed with Gjøco Interior Cleaner and rinsed with water. Old glossy and semi-gloss paint layers should be matted down with sandpaper. Untreated panel: Prime with at least 2 coats of Gjøco Primer.
Previously painted surfaces: Prime with one coat of Gjøco Primer. Substrates previously painted with alkyd paint should always be primed before applying Gjøco Superfinish 15. Usage: Gjøco Superfinish 40 is ready for use and should not be thinned.
Apply generously and evenly with suitable painting tools. On absorbent and porous surfaces, 3 coats are recommended to avoid patches. To achieve a satisfactory finish, avoid going back and touching up semi-dry paint.
Other information
Ambient and substrate application temperature must be at least +10° C. Painted surfaces must cure for at least 4 weeks before cleaning with a mild detergent. Stir well before use. Different production batch numbers should be mixed before use. Replace the lid securely to store paint and prevent spills and drying out.
Liquid paint must not be poured into the drain but delivered to a recycling center. Store in a dry, frost-free place.
Safety
See separate safety data sheet. EU limit value for this product (cat A/d.): 130 g/l (2010). This product contains: <75 g/l VOC. Ecolabel: Gjøco Superfinish 40 is approved by Ecolabel Norway and meets the requirements for the Nordic Swan and EU Ecolabel. * Suitable for indoor use * Limited content of hazardous substances * Low solvent content. More information is available at http://ec.europa.eu/ecolabel
Waste management
Liquid paint should not be poured into drains or waterways, but delivered to a recycling station.