Description
Gjøco Quick Filler is a ready-mixed, extra fine-grade manual filler for indoor use. The product is used for filling frames, doors, hatches, or similar surfaces of wood and steel. Gjøco Quick Filler dries quickly and results in a hard, minimally absorbent surface that is well-suited for overpainting.
- Extra fine-grade.
- Leaves no pores.
- Easy to apply.
Product description
Pre-treatment
Surfaces must be clean, dry, and structurally sound. Glossy, painted surfaces should be cleaned with Gjøco House Wash or Gjøco Interior Wash and sanded matte. Absorbent substrates and untreated wood should be primed before filling.
Application
Apply by hand using a steel putty knife. Once the filled surface has dried, sand it down. Use sandpaper with a grit of 100–120. Remove dust before the next treatment. Filled surfaces must be pre-sized before wallpapering. Gjøco filler.
Storage
When storing leftover filler, replace the lid tightly to prevent spills and drying. The filler must be transported, stored, and kept upright in a dry, frost-free location.
Waste management
Filler and wash water must not be emptied into drains or released into the environment, but should be delivered to a recycling center. Empty, clean, and dry plastic packaging without handles can be disposed of as plastic waste.
Other information
Store in a dry, frost-free location protected from sunlight. Unopened packaging can be stored for 12 months. May remain usable after 12 months; check consistency and smell.
Specifications
Technical data
Type: Latex polymer, with white dolomite as a filler
Color: White
Density: Approx. 1.8 kg/l
pH: Approx. 9
Grain size: Max 0.03 mm
Solids content, volume %: Approx. 53
Application method: Steel putty knife
Thinner/cleaning agent: Water. Should not normally be thinned
Material consumption: For skim coating with 0.5 mm layer thickness: 0.5 liters/m2
Drying time: Depends on substrate, layer thickness, temperature, and humidity
Touch-dry: Approx. 0.5 hours
Overpainting interval, minimum: Approx. 8 hours
Layer thickness: Maximum 2 mm
Minimum application temperature: +5°C
Shelf life: 1 year in unopened packaging
Dust-dry: 30 min.
Touch-dry: 4 h.
Ready for use: 4 h.
Overpaintable after 4 h.
Air temperature 23 °C
Air humidity (RH) 50 %
Substrate temperature 23 °C
Data sheets
links,anza-steel-putty-knife-with-hammer-head,gjoco-wipes,