Description
One-component polyurethane foam adhesive for fixing building stones/blocks and bricks in non-load-bearing walls, masonry, or other partitioning building elements. Compared to masonry mortar, Stone Fix Foam allows for significantly faster and cleaner masonry work, saving both time and money.
Product description
PRODUCT DESCRIPTION
One-component polyurethane foam adhesive for fixing building stones/blocks and bricks in non-load-bearing walls, masonry, or other partitioning building elements.
Compared to masonry mortar,
Stone Fix Foam allows you to perform masonry work significantly faster and more cleanly. Gluing results in a less dusty working environment, and the foam applicator gun is the only tool needed.
Very economical, saves time and money. Application with a foam gun.
ADVANTAGES
• Very good adhesion properties.
• Strong adhesive bond in just 30 minutes.
• Full strength after just 24 hours.
• Very economical, saves time and money.
• Quality results even at low temperatures (-5°C).
• Application with a foam gun.
AREA OF APPLICATION
High-durability adhesive - for indoor and outdoor use. Use in non-load-bearing structures/walls and barriers without fire-separating requirements. Used for horizontal gluing – not for vertical hanging. Protect the adhesive joint from UV/sunlight once work is complete.
Check adhesion to the surface, as there are many different types of surfaces. Also adheres to expanded polystyrene, metal, wood, etc.
INSTRUCTIONS FOR USE
Clean the work surface of dust, loose particles, grease, and oil before use. Hold the canister upright and screw it onto the foam gun, holding the handle of the gun with one hand and screwing the canister with the other. While screwing, it is necessary to ensure that no one is in front of the foam gun. Do not screw the canister onto the foam gun with the valve facing downwards. Do not rotate/screw the gun onto the canister; let the foam gun rotate.
After attaching the gun, shake the canister vigorously at least 20 times and turn it into the working position so that the bottom of the canister is facing upwards.
A pre-moistened surface ensures better results. The amount of adhesive/foam can be adjusted with the trigger on the foam gun.
Can be used at temperatures down to -5 °C up to +35 °C. The container should be stored between +5 °C and +25 °C; best results at +20 °C. Stone Fix Foam creates a thin adhesive layer when the adhesive leaves the foam gun.
The stone surfaces should be joined immediately.
The adhesive must be applied to both vertical and horizontal sides of the block.
Uncured foam is removed with Foam Gun Cleaner, cured foam mechanically. You can easily remove cured stone adhesive using, for example, a sharp putty knife once the masonry work is finished.
ENVIRONMENT & HEALTH
The Safety Data Sheet must be read and understood before use to ensure proper worker protection and protective equipment.
Specifications
TECHNICAL DATA
Property before application
Material type: 1-component polyurethane foam adhesive
Color: Light yellow
Installation temperature (climate/substrate): -5 °C to +35 °C
Installation temperature (cartridge): The container should be stored between +5 °C and +25 °C; best results at +20 °C.
Storage conditions: Indoors in a cool and dry place, standing vertically
Property after application: Tack-free adhesive surface: 8-15 minutes
Drying/curing time (stable structure): approx. 30 minutes
Drying/curing time (full): Fully cured after 24 hours at +23 °C and after 72 hours at +5 °C
Temperature resistance: Cured adhesive -40 to +90 °C (momentary up to +130 °C)