Description
Water-based effect lacquer for a custom frost effect, for both indoor and outdoor use. The result creates a structure resembling ice crystals.
The frost effect lacquer can be easily wiped away using a cloth and detergent. For a permanent result, overcoat with Belton clear lacquer.
Product description
For a permanent result, overcoat with Belton clear lacquer. (art. no. 2323399). Can be used directly on many surfaces, such as ferrous metals, wood, cardboard, stone, glass, ceramics, and most plastics. Surfaces such as non-ferrous metals, galvanized steel, aluminum, and certain plastics must be pre-treated with Belton special primer.
Turn the can upside down after use and spray the valve empty.
Pre-treatment:
Surfaces such as non-ferrous metals, galvanized steel, aluminum, and certain plastics must be pre-treated with Belton special primer. The surfaces must be smooth, clean, dry, and free of grease. If necessary, uneven surfaces can be lightly sanded.
Instructions/application:
The frost effect should be sprayed in even, thin layers. Layer thickness affects the resulting effect. Shake the can for at least 1 minute. Perform a test spray to check compatibility and shade.
Spray distance 15-25 cm.
The effect is visible after 3-10 minutes.
After 60 minutes, it can be overcoated with Belton clear lacquer to preserve the effect. If you want to be able to wipe off the effect later, do not apply a clear coat. Turn the can upside down after use and spray the valve empty.
Turn the can upside down after use and spray the valve empty.
Specifications
Specifications
Base material: Polyurethane dispersion
Drying time at 20°C: Dust-dry 20 min.
Touch-dry: approx. 60 min.
Through-dry: approx. 24 hours.
Flash point: -10°C
Fire class: 1
Storage life: 2 years
Contents: 400 ml
FAQ
What is Belton Frost Effect? A water-based effect lacquer that creates a decorative ice crystal structure on the surface – perfect for creative decoration projects indoors and outdoors.
What surfaces does it work on? Directly on ferrous metals, wood, cardboard, stone, glass, ceramics, and most plastics. Non-ferrous metals, galvanized steel, and aluminum need to be pre-treated with Belton special primer.
How quickly is the frost effect visible? The effect is visible after just 3–10 minutes.
Can I remove the effect afterwards? Yes! Without a clear coat, the effect can be easily wiped away with a cloth and detergent. If you want to preserve the effect permanently, apply Belton clear lacquer after 60 minutes.
How do I apply it? Shake the can for at least 1 minute, keep a distance of 15–25 cm, and apply in even, thin layers. Layer thickness affects the resulting effect.
How long is the drying time? Dust-dry after 20 minutes, touch-dry after approx. 60 minutes, and through-dry after approx. 24 hours.