Description
You can find pre-mixed colors here
Gjøco Proff Solid is a water-borne, low-odor, and solvent-free PVA dispersion paint for indoor use in dry areas. Gjøco Proff Solid is used as an intermediate and top coat on various types of construction boards, plaster, concrete, fiberglass wallpaper, previously painted surfaces, etc.
Recommended coverage: 8 - 10 m²/liter
- PVA dispersion paint
- For indoor use in dry areas
- Used as an intermediate and top coat
- Low odor
Color chart
Product description
Pre-treatment
The substrate must be clean and dry. Clean with Gjøco Interiørvask or Gjøco Husvask and rinse well with clean water. Previously painted surfaces, MDF, and hard, smooth surfaces should be sanded down and primed with Gjøco Proff Heft. Discolored surfaces should be primed with Gjøco Proff Isolèr to prevent bleed-through. Untreated masonry, absorbent surfaces, and previously whitewashed surfaces should be scraped, brushed, and washed before priming with Gjøco Primer for masonry and concrete.
Application
Proff Solid is ready for use and should generally not be thinned. Apply 1–2 coats as needed. It is recommended to use a roller with an extension pole, as it is easier to avoid roller marks. For an even finish, it is recommended to roll entire lengths in the same direction across the whole wall.
Note
Use the same production number for the same coat and the same surface to avoid gloss and color differences. If necessary, different production numbers can be mixed before use. Shade differences may occur if the bucket is tinted on different tinting machines and/or at different times. Be aware of this if more paint is needed for the same project later on.
Storage
When storing leftover paint, close the lid tightly to prevent spills and drying. The paint must be transported, stored, and kept upright, in a dry and frost-free place.
Environmental labeling
Gjøco Proff Solid is approved by the Nordic Ecolabel and meets the requirements for the Swan label. Accepted according to the Byggvarubedömningen assessment criteria, BVB.
Waste management
Liquid paint and wash water must not be poured into drains or into nature, but must be taken to an approved hazardous waste collection point. Empty, clean, and dry plastic packaging without handles can be disposed of as plastic waste.
Specifications
Type: PVA dispersion paint
Color: Base White, A, B, and C
Gloss: Supplied in gloss 7
Density: Approx. 1.4 g/l
Solids content (volume %): Approx. 40
Application method: Brush, roller, or spray. Spraying is recommended only for professionals.
Thinner/cleaning agent: Water
Recommended coverage: 8 - 10 m²/liter, depending on the substrate
Guideline data for airless spray:
Nozzle: 0.53 mm, 0.021"
Spray angle: 65°-80°
Spray pressure: 150 kg/cm²
Drying time (23 °C, 50% R.H.):
Touch dry: 1 hour
Recoating interval, minimum: 3 hours.
Data sheets