Description
Primer with good filling capacity. Filler for glass fiber wallpaper and fleece.
Gjøco Proff Safe is a water-borne, low-odor, and solvent-free PVA dispersion paint for indoor use in dry areas. Gjøco Proff Safe is used as a primer and intermediate coat on various types of construction boards, plaster, concrete, fiberglass wallpaper, previously painted surfaces, etc.
Product description
Pretreatment
The surface must be clean and dry. Clean with Gjøco Interiørvask or Gjøco Husvask and rinse well with clean water.
- Previously painted surfaces, MDF, and hard, smooth surfaces should be matted down with sandpaper and primed with Gjøco Heftgrunn.
- Discolored surfaces should be primed with Gjøco Sperregrunn to prevent bleed-through.
- Untreated masonry, absorbent surfaces, and previously limewashed surfaces should be scraped, brushed, and washed before priming with Gjøco Primer for masonry and concrete.
Application
Proff Safe is ready for use and should generally not be thinned. Apply 1–2 coats as needed.
Storage
When storing leftover paint, close the lid tightly to prevent spills and drying. The paint must be transported, stored, and kept upright, in a dry and frost-free place.
Eco-labeling
Gjøco Proff Solid is approved by the Nordic Swan Ecolabel and meets the requirements for the Swan eco-label. Accepted according to the Byggvarubedömningen (BVB) assessment criteria.
Waste management
Liquid paint and wash water must not be poured into drains or released into nature but must be taken to an approved hazardous waste collection point. Empty, clean, and dry plastic packaging without handles can be disposed of as plastic waste.
Other information
Stir well before use.
Specifications
Specifications
Type: PVA dispersion paint
Color: White
Gloss: Matt
Density: Approx. 1.4 g/l
Dry content (volume %): Approx. 38
Application method: Brush, roller, or spray. Spraying is recommended for professionals only.
Thinning/cleaning agent: Water
Recommended coverage: 7 - 10 m²/liter, depending on the surface
Guideline data for airless spray:
Nozzle: 0.53 mm, 0.021"
Spray angle: 65°-80°
Spray pressure: 150 kg/cm²
Drying time (23°C, 50% R.H.):
Dust dry: 1 hour
Recoating interval, minimum: 3 hours. Varies with changes in temperature, humidity, ventilation, and film thickness. Full adhesion is achieved after 4 weeks of curing.
Minimum application temperature: + 5°C. Best results are achieved when applied at room temperature.