Description
Hand filler for wet rooms.
Proff Lättspackel Våtrum is a medium-grade lightweight hand filler for indoor use in wet rooms or where an extra durable surface is desired. Used for joint and skim coating on building boards and most substrates for new construction and renovation. Use paper joint tape when filling joints on plasterboards.
- Ready-mixed, blue hand filler specifically developed for wet rooms.
- Provides a hard and water-repellent surface.
- Provides a premium surface finish for further treatment.
- High filling capacity.
- Unique adhesive formula for paper joint tape and corner beads.
Product description
-
Pre-treatment
Surfaces must be clean, dry, and sound. Glossy, painted surfaces should be cleaned with Gjøco Husvask or Gjøco Interiørvask and lightly sanded.
Application
Apply by hand using a steel spatula. Temperature: minimum +5°C. Once the filled surface has dried, sand it down. Use sandpaper with grit 100–120. Remove dust before the next treatment. Filled surfaces must be primed before wallpapering.
Cleaning of tools:
Water
Storage
When storing leftover filler, replace the lid tightly to prevent waste and drying out. The filler must be transported, stored, and kept upright in a dry, frost-free location.
Waste management
Filler and wash water must not be discharged into drains or the environment, but delivered to a hazardous waste collection point. Empty, clean, and dry plastic packaging without handles can be disposed of as plastic waste.
Other information
Store in a dry, frost-free place protected from sunlight. Unopened packaging can be stored for 12 months.
May also remain usable after 12 months; check consistency and smell.
Specifications
Type: Latex polymer, with lightweight fillers and dolomite
Color: Gray
Density: Approx. 1 kg/l
pH: Approx. 9
Grain size: Max 0.2 mm
Dry content, volume %: Approx. 58
Application method: Steel spatula
Thinning/cleaning agent: Water. Should normally not be thinned
Material consumption: For skim coating at 1 mm layer thickness: 1 liter/m2
Drying time: Depends on substrate, layer thickness, temperature, and humidity
Touch dry: Approx. 0.5 hours
Overcoating interval, minimum: Approx. 24 hours
Layer thickness: Max. 3 mm
Minimum application temperature: +5°C
Shelf life: 1 year in unopened packaging