Description
READY-MIXED WHITE can be found here.
Beautiful, matte and weather-resistant paint that provides a warm and sophisticated expression.
Herregård Paintmaster is a water-borne self-cleaning oil-acrylic paint (hybrid) that is extra effective against mold and dirt accumulation. Herregård Paintmaster has a muted matte surface that provides superb color reproduction. Can be used externally on new, old, stained, painted or pressure-treated wood. Used in the system with Gjøco Oil Primer. Herregård Paintmaster can also be used as a topcoat on primed metal and plastic such as gutters, fittings, etc., on buildings.
Product Description
Pre-treatment
The surface must be clean and dry. Apply 1 coat of Gjøco Oil Primer to new and bare wood. New wood that has been left untreated for more than 4 weeks should be cleaned and wire-brushed before treatment with Gjøco Oil Primer. All end grain and cut surfaces must be thoroughly saturated with Gjøco Oil Primer, 3–4 coats wet-on-wet. Previously treated surfaces are cleaned with Gjøco Power Wash. Loose paint, stain and wood fibers are removed by scraping/brushing. On planed wood, glossy surfaces, side edges and rebates on exterior panels, wire-brushing/sanding may be necessary to ensure adhesion. To achieve the best possible edge coverage, round off sharp edges before priming. Only spots (arising after wire-brushing/scraping) are applied with Gjøco Oil Deck Stain/Oil Paint in the same color as the topcoat before further treatment.
Priming
New and untreated bare wood should be applied with one coat of Gjøco Oil Primer. For extra protection, a thin coat of Gjøco Oil Deck Stain/Oil Paint in the same color as the desired topcoat can be applied to factory-primed or impregnated wood before further treatment. End grain and cut surfaces must be thoroughly saturated with Gjøco Oil Primer, 3–4 coats wet-on-wet.
Application
Apply 2 coats on new unplaned timber and 3 coats on new planed timber. For previously treated wood, apply 1–2 coats as needed, or 3 coats on planed timber.
Note
Use the same batch number on the same layer and surface to avoid differences in gloss and color. If necessary, different batch numbers can be mixed before use. Shade differences can occur if the bucket is tinted on different tinting machines and/or at different times. Be aware of this if more paint is needed for the same project later.
Storage
Close the lid tightly when storing paint to prevent spills and drying out. The paint should be transported and stored upright, dry and frost-free.
Waste Management
Liquid paint must not be emptied into drains or into nature but should be taken to an approved collection point for hazardous waste. Empty, clean and dry plastic packaging without handles can be delivered as plastic waste.
Other Information
The surface must be firm, clean and dry before the paint is applied. Surfaces previously treated with linseed oil paint/stain can cause blistering. Previous tar treatment can cause discoloration that is particularly visible on light colors. Dew on a semi-dry surface can cause matte spots. Matte spots can also occur when drying in high humidity and low temperatures. Sun on a wet or semi-dry surface can cause skinning and blistering. Do not use on waxed wood. Paint on fire-retardant cladding can cause salt efflorescence and flaking.
The application temperature in air and on the surface must be at least +5 °C. Low temperature and dew can cause insufficient film formation/hardening. The product must not be diluted or mixed with foreign oils/products.
Specifications
Technical data
Type: Water-dilutable hybrid paint based on alkyd oil and acrylate
Color: Optional
Gloss: Matte 5
Density: Approx. 1.25 kg/l (white)
Application method: Brush and roller. Spray painting should be performed by professionals.
Thinning / cleaning agent: Water, tools cleaned with soap and water
Film thickness, wet: 90–110 micrometers
Film thickness, dry: 40–50 micrometers
Recommended consumption: Unplaned wood: 6–8 m²/liter Planed wood: 8–12 m²/liter
Information high-pressure sprayer Paint:
- Nozzles: 0.018" / 0.46 mm
- Spray angle: 65°-80°
- Paint pressure: 150–180 kg/cm² / 15–18 MPa
Drying (23 °C, 50 % RH):
Dust dry: ½ hour Minimum recoating interval: 2 hours
Lowest application temperature: +5 °C. The temperature in the air and on the surface must be +5 °C.