Description
Gjøco G2 Wood Impregnation is a colorless, alkyd-based special impregnation that replaces varnish treatment. It is waterproof and durable. Used as a topcoat in combination with Gjøco G1 Wood Impregnation on wooden boats above the waterline. Can be used both outdoors and indoors.
- Glossy and colorless oil varnish.
- For wooden boats above the waterline.
- For garage doors, doors, and garden furniture.
- Suitable for teak.
Product Description
Pretreatment
The surface must be clean and dry. Surfaces attacked by algae or mold should be treated with Gjøco Fungicide and Mildew Remover. Allow to dry before further treatment.
Instructions for use
Gjøco G2 Wood Impregnation should be stirred well before use and applied to the surface with a brush, roller, or sprayer.
Included in a system with Gjøco G1 Wood Impregnation, which is used for the first coat.
Other information
The product must be stored in accordance with national regulations. The packaging must be kept tightly closed and stored in a dry place at an even temperature.
Specifications
PHYSICAL DATA
Type: Alkyd oil-based wood impregnation
Color: Clear
Gloss: Glossy
Flash point: Approximately 42 °C
Specific gravity (kg/l): 0.87
Solids content (volume %): 31
APPLICATION DATA
Application method: Brush, roller, or airless sprayer
Thinner/cleaning agent: White spirit or mineral turpentine
Recommended film thickness, wet: 100 micrometers
Recommended film thickness, dry: 31 micrometers
Recommended coverage: Approximately 10 m2
Guideline data for airless sprayer:
Nozzle: 0.013”
Spray angle: 65°-80°
Paint pressure: 150 kg/cm3
Drying time (23 °C, 50 % R.H.):
Dust dry: Approximately 3-4 hours
Recoating interval, maximum: Wet-on-wet and after 4 hours