Description
You can find optional colors here
Gjøco Proff Uno is a low-odor, water-borne, pure acrylic paint for indoor use. It has good coverage and provides a durable surface that is easy to keep clean. Perfect as wall paint. Used on various types of construction boards, plaster, concrete, fiberglass wallpaper, previously painted surfaces, etc.
Color chart
Recommended coverage 8 - 10 m²/liter
Product description
Pre-treatment
- The surface must be clean and dry.
- Clean with Gjøco Interiørvask or Gjøco Husvask and rinse well with clean water.
- Previously painted surfaces, MDF, and hard, smooth surfaces should be matted down with sandpaper and primed with Gjøco Proff Heft.
- Discolored surfaces should be primed with Gjøco Proff Isolèr to prevent bleed-through.
- Untreated masonry, absorbent surfaces, and previously limewashed surfaces should be scraped, brushed, and washed before priming with Gjøco Primer for masonry and concrete.
Application
- Proff Uno is ready for use and should normally not be thinned.
- Apply 1–2 coats as needed.
- On absorbent surfaces, it may be necessary to apply several coats to avoid patchiness.
- It is recommended to use a roller with an extension pole to avoid lap marks.
- To achieve an even result, roll full lengths in the same direction across the entire wall.
Note
- Use the same production number for the same coat and the same surface to avoid gloss and color differences.
- If necessary, different production numbers can be mixed before use.
- Color variations may occur if the bucket is tinted on different tinting machines and/or at different times. Be aware of this if more paint is needed for the same project afterwards.
Storage
- When storing leftover paint, replace the lid securely to prevent spills and drying out.
- The paint must be transported, stored, and kept upright, in a dry and frost-free place.
Environmental labeling
- Gjøco Proff Uno is approved by the Nordic Ecolabel and meets the requirements for the Swan label.
- The product has been tested in accordance with the test requirements of BREEAM-NOR.
- The product meets BREEAM-NOR HEA 02.
- Gjøco Alle Rom does not contain any substances on the A20 list.
- Accepted according to the Swedish Construction Materials Assessment (Byggvarubedömningen), BVB.
Waste management
- Liquid paint and wash water must not be emptied into drains or nature but must be taken to an approved collection point for hazardous waste.
- Empty, clean, and dry plastic packaging without handles can be disposed of as plastic waste.
Other information
- Stir well before use.
- Package sizes: 2.7 L and 9 L, depending on the gloss level.
Specifications
Technical data
- Type: Pure acrylic paint
- Color: Base White, A, B and C
- Gloss: Supplied in gloss 7
- Density: 1.3 g/l
- Solids content (volume %): Approx. 40%
Application method
- Brush, roller or spray
- Spraying is recommended for professionals only
Thinner / Cleaning agent
- Water
Recommended coverage
- 8 - 10 m²/liter, depending on the surface
Guideline data for airless spray
- Nozzle: 0.021", 0.53 mm
- Spray angle: 65°-80°
- Spray pressure: 150 kg/cm²
Drying time (23 °C, 50 % R.H.)
- Dust dry: 1 hour
- Recoating interval, minimum: 4 hours (Varies with changing temperatures, humidity, ventilation and coat thickness. Full adhesion is achieved after 4 weeks of curing.)
Minimum application temperature
- +5°C (Best results are achieved when applied at room temperature)
Data sheets