Gjøco Proff UNO Gloss 5 Low-odor and solvent-free. Any color

You can find ready-mixed colors here

Gjøco Proff Uno is a low-odor, water-borne, pure acrylic paint for indoor use. It covers well and provides a durable surface that is easy to keep clean. Perfect as wall paint. Used on various types of construction boards, plaster, concrete, fiberglass wallpaper, previously painted surfaces, etc.

Color card

Recommended consumption 8 - 10 m²/liter

Product description

Pre-treatment

• The surface must be clean and dry.
• Clean with Gjøco Interiørvask or Gjøco Husvask and rinse well with clean water.
• Previously painted surfaces, MDF, and hard, smooth surfaces should be matted down with sandpaper and primed with Gjøco Proff Heft.
• Discolored surfaces should be primed with Gjøco Proff Isolèr to prevent bleed-through.
• Untreated masonry, absorbent surfaces, and previously limewashed surfaces should be scraped, brushed, and washed before priming with Gjøco Primer for masonry and concrete.

Application

• Proff Uno is ready to use and should normally not be diluted.
• Apply 1–2 coats as needed.
• On absorbent surfaces, it may be necessary to apply several coats to avoid spots.
• Feel free to use a roller with an extension pole to avoid lap marks.
• To obtain an even result, roll entire lengths in the same direction over the whole wall.

Note

• Use the same production number for the same coat and the same surface to avoid gloss and color differences.
• If necessary, different production numbers can be mixed before use.
• Shade differences may occur if the bucket is tinted on different tinting machines and/or at different times. Be aware of this if more paint is needed for the same project later on.

Storage

• When storing leftover paint, put the lid on tightly to prevent spills and drying.
• The paint must be transported, stored, and kept standing upright, dry, and frost-free.

Eco-labeling

• Gjøco Proff Uno is approved by the Nordic Ecolabel and meets the requirements for the Swan label.
• The product has been tested in accordance with the test requirements from BREEAM-NOR.
• The product meets BREEAM-NOR HEA 02.
• Gjøco Alle Rom does not contain any substances on the A20 list.
• Accepted according to the Building Materials Assessment's criteria, BVB.

Waste management

• Liquid paint and wash water must not be poured into the sewer or into nature, but must be taken to an approved collection point for hazardous waste.
• Empty, clean, and dry plastic packaging without handles can be delivered as plastic waste.

Other information

• Stir well before use.
• Packaging sizes: 2.7 L and 9 L, depending on the gloss level.

Specifications

Technical data

• Type: Pure acrylic paint
• Color: Base White, A, B, and C
• Gloss: Supplied in gloss 5
• Weight per liter: 1.3 g/l
• Dry content (volume %): Approx. 40%

Application method

• Brush, roller, or spray
• Spraying is recommended for professionals only

Dilution / Cleaning agent

• Water

Recommended consumption

• 8 - 10 m²/liter, depending on the surface

Indicative data for high-pressure spray

• Nozzle: 0.021", 0.53 mm
• Spray angle: 65°-80°
• Spray pressure: 150 kg/cm²

Drying time (23 °C, 50 % R.H.)

• Dust dry: 1 hour
• Overpainting interval, minimum: 4 hours (Deviates with changed temperatures, humidity, ventilation, and layer thickness. Full adhesion is achieved after 4 weeks of curing.)

Minimum application temperature

• +5°C (Best results are achieved when applied at room temperature)

Data sheets

Technical data sheet: 

Safety data sheet:

linkslinks ,anza-basic-for-grova-underlag-rilon,anza-basic-for-medelfina-underlag,anza-platinum-medelfina-underlag-micmex,anza-elite-maxibygel-2-kompomponent,anza-platinum-maxibygel-2-komp-aluminium,scotch®-maskeringstejp-ute-inne-washipapper,3m™-korttidsoverall-typ-5-6-i-spandex-med-huva,gjoco-wipes,