You can find your chosen color here.
Herregård Arctic is a water-borne hybrid paint for exterior house siding, using unique technology that keeps the color and gloss stable for a long time in tough climates. The product has a surface that is dirt-repellent with self-cleaning properties. Used on new, old, stained, painted, or pressure-treated exterior wood. Must be used in a system with Gjöco Oil Primer. Herregård Arctic can also be used as a topcoat on primed metal and plastic such as gutters, fittings, and similar building features.
APPLICATION DATA
Application method: Brush and roller. Spraying is recommended for professionals only.
Thinning/cleaning agent: Water, clean with soap and water
Rec. Film thickness, wet: 90–110 micrometers
Rec. Film thickness, dry: 40–50 micrometers
Guidance data for airless spray:
Consumption: Rough wood approx. 6–8 m2/liter, planed wood approx. 8–12 m2/liter
Drying time: (23 °C, 50% R.H.): Depends on temperature, humidity, wind, and film thickness. Do not paint if there is a risk of dew or rain before the paint film is dry.
Touch dry: 0.5 hours
Recoating interval, minimum: 2 hours
Minimum application temp. + 5°C Air and surface temperature should be above +5°C
INSTRUCTIONS FOR USE
Pre-treatment
The surface must be clean and dry. On new and bare wood as well as pressure-treated wood, apply 1 coat of Gjøco Oil Primer. New wood that has been left untreated for more than 4 weeks should be cleaned and wire-brushed before treatment with Gjøco Oil Primer. All wood ends / cut surfaces must be well saturated with Gjøco Oil Primer, 3–4 coats wet-on-wet. Previously treated surfaces are cleaned with Gjøco Kraftvask. Loose paint/stain/glaze flakes and wood fibers are removed by wire brushing/scraping. On planed wood, side edges on exterior siding, and other glossy surfaces, wire brushing/sanding may be required to ensure adhesion. To achieve the best possible edge coverage, round off sharp edges before priming.
Priming
On new, untreated, bare, factory-primed, or impregnated wood, apply one coat of Gjøco Oil Primer. End grain and cut surfaces should be saturated well with Gjøco Oil Primer, 3–4 applications wet-on-wet.
Application
On new untreated wood, apply 2 coats, and on new planed wood, apply 3 coats. On previously treated wood, apply 1–2 coats as needed or up to 3 coats on planed wood.
Storage
The product must be transported and stored upright, dry, and frost-free.
Waste management
Liquid paint should not be poured into drains or the environment but must be delivered to an approved recipient of hazardous waste.
OTHER INFORMATION
Different production numbers should be mixed before use to avoid differences in gloss and color. The surface must be firm, clean, and dry before the paint is applied. Surfaces previously treated with linseed oil paint/stain may cause blistering. Previous treatment with tar can lead to discoloration, which is particularly visible in light colors. Dew on semi-dry surfaces can cause dull spots. Direct sunlight on a wet or semi-dry surface can cause skinning and blistering. Do not use on frozen surfaces. Painting on fire-retardant surfaces can lead to salt efflorescence and peeling. The product must not be thinned or mixed with other oils/paint products. Bases are tintable with GjøcoMix. Application temperature in the air and on the surface must be at least + 5° C. Packaging sizes: 2.7 and 9 liters.
Type: Water-borne hybrid paint based on alkyd oil and acrylic
Color: Base white, A, B, C, oxide red, bright red, yellow, ocher
Gloss: Semi-gloss 50
Density: (kg/l): Approx. 1.25 (white)
VOC: EU limit value for the product (cat. A/d): 130g/l (2010).
Product contains: ˂60g/l VOC
