Herdins Imprenex Wash In Plus - 500ml

Waterproofing in a washing machine
Garments must be clean and completely dry before waterproofing.
One 500 ml bottle is enough to waterproof up to 4 kg of garments (dry weight) in a household washing machine.

1. Place the dry garments in the washing machine.
2. Select a 40-degree wash cycle without pre-wash.
3. Pour Imprenex Wash In Plus into the detergent compartment.
4. Start the washing machine.
5. Dry the garments. Ironing on low heat or quick-drying in a warm place (tumble dryer, drying cabinet, or in the sun) enhances the waterproofing effect.

It is also possible to pour Imprenex Plus into the fabric softener compartment and thus waterproof the garment while washing it. However, this yields a slightly poorer result than the above.

Waterproofing by soaking
Garments must be clean and completely dry before waterproofing.
One 500 ml bottle is enough for approx. 40 liters of water and 4 kg of garments (dry weight).

1. Mix Imprenex Wash In Plus with lukewarm water and stir.
2. The garments should be completely covered by the bath. Stir and squeeze the garments through now and then. Let the garments soak for about 20 minutes.
3. After waterproofing, squeeze out the garment and rinse once in cold water.
4. Ironing or quick-drying in a warm place (tumble dryer, drying cabinet, or in the sun) enhances the waterproofing effect.

By re-waterproofing the garments at regular intervals, they maintain their dirt and water-repellent ability.

Please note
The waterproofing wears off gradually. Therefore, repeat the treatment at regular intervals. Drip some water on the garment; if the fabric absorbs the water, it is time to repeat the treatment.