Description
Impregnating oil with good penetration for woodwork.
Gjøco G1 Wood Impregnation is a clear, alkyd-based special impregnation with excellent penetrating effect. Protects against rot and fungi. Used as an impregnating agent and primer both outdoors and indoors on all types of wood.
- Good penetrating ability.
- For wooden boats, garden furniture, and garage doors.
- Suitable for teak and other hardwoods.
Product description
Pre-treatment
The surface must be clean and dry. Surfaces affected by algae or mold should be treated with Gjøco Algae and Mold Remover. Let dry before further treatment.
Instructions for use
Gjøco G1 Wood Impregnation should be stirred well before use and applied to the surface with a brush, roller, or sprayer. Part of a system with Gjøco G2 Wood Impregnation, which is used as a topcoat.
Other information
The product must be stored according to national regulations. The packaging must be kept tightly closed and stored in a dry place at a stable temperature.
INSTRUCTIONS FOR USE
Pre-treatment
The surface must be clean and dry. Surfaces affected by algae or mold should be treated with Gjøco Algae and Mold Remover. Let dry before further treatment.
Instructions for use
Gjøco G1 Wood Impregnation should be stirred well before use and applied to the surface with a brush, roller, or sprayer.
Part of a system with Gjøco G2 Wood Impregnation, which is used as a topcoat.
Other information
The product must be stored according to national regulations. The packaging must be kept tightly closed and stored in a dry place at a stable temperature.
Specifications
Physical data
- Type: Alkyd oil-based wood impregnation
- Color: Clear
- Gloss: Glossy
- Flash point: Approx. 42 °C
- Specific gravity (kg/l): 0.84 kg/liter
- Solids content (volume %): 20%
Application data
- Application method: Brush, roller, or high-pressure sprayer
- Thinner / cleaning agent: White spirit or turpentine
- Recommended film thickness, wet: 100 micrometers
- Recommended film thickness, dry: 20 micrometers
- Recommended coverage: Approx. 5 m² per liter
Guidance data for high-pressure sprayer
- Nozzle: 0.013”
- Spray angle: 65°-80°
- Paint pressure: Min. 150 kg/cm²
Drying time (23 °C, 50% R.H.)
- Dust dry: 3 hours
- Overcoating interval, maximum: Wet-on-wet and after 4 hours